90mm Orb Fire Poi

Description

Pair Orb Fire Poi

Now uses pure kevlar with a specialty core. 

Standard setup Includes:
– Knob (See below for description and photos above)
– Technora Tethers (5/16”, 3/8” or 1/2″(black only))
– 90mm Orb Heads ~ 190 grams

Hardware Options near heads (See photo):
#1 Technora Connected directly to eyebolt on head
#2 Technora connected via a quick-link to the eyebolt
#3 Technora inset into the head (Hybrid or Static technora require this connection point)

Overall length = measures entire poi tip-to-tip (including the knobs and heads). We recommend measuring from center of palm to arm pit. Most spinners choose 18″ to 28″.. If we do not receive a length, they will be set to 24”.

Standard washer count per knob: 2
– Pom, Ovo, Delphin & Standard Widmar washers weigh: 3 grams each
– XL Widmar washers weigh: 5 grams each

Technora Options
– 5/16″ & 3/8″ & 1/2″: Black
– Hybrid: 10.5mm in gold
– Static Technora: 8mm, 10mm, 11mm, 12mm in gold

Knob options (See Photos for color references):

—> LanternSmith PomGrip 2.0

– Weight: 16g… 33g with 6 washers.
– Diameter: 35mm   // Height: 25mm
– Half sphere shape. Squishy
– Grippy

—> LanternSmith’s Ovo Knob
– 27g (empty), capable of 60g+ with washers
– Diameter: 35mm  // Height: 48mm
– Grippy

—> Home of Poi/Play Sphere knobs
– Weight = 30g
– Diameter: 37mm – Firm rubber-silicone 
– HOP Have textured logo on side (Purple & Light Blue only)

—> Widmar Knobs 
– 3D printed by Prop Box Approved
– These have our logo printed on two faces of each knob

Standard:
– 7 grams
– 34mm Diameter x 23mm Tall

XL:
– 10 grams
– 42mm Diameter x 28mm Tall

Stubby:
– 7 grams
– 39mm Diameter x 23mm Tall
– Slippery 

—> Delphin Knob
– Weight: 5 grams
– Diameter:   34mm   // Height: 23mm
– Comparable in size to standard Widmar knob
– Firm but texture is soft

—> Px3 Knob
– Weight: 10g
– Diameter:  33mm // Height: 22mm
– Small grip
– Thermoplastic Rubber

—>Flip 
– Weight: 13g
– Diameter: 35mm // Height: 25mm
– Comparable in shape to Widmar Standard
– Rubber-like firm material 
– Texture changes with introduction to hand oils – Grippy 

—> Blank Ultraknob (NO LED) 
– Weight: 20g 
– Diameter: 38 mm // Height: 28mm

—> LED Ultraknob Basic by UltraPoi + $25
– Weight: 23g
– Diameter: 38 mm // Height: 28mm
– Multi-mode settings
– Rechargeable with 2032 Coin Cell battery (Charger not included)
– Warrantied by UltraPoi directly 

—> LED Ultra Stubby Basic
– 3D printed by PBA 
– Weight: 17.5 grams
– Diameter: 42mm // Height: 28mm 

—> LED Ultra XL Basic 
– 3D printed by PBA 
– Weight: 16g 
– Diameter: 39mm Height: 23mm 

—> LED UltraKnob Pro by UltraPoi 
– Weight: 26g
– Diameter: 38mm // Height: 28mm
– Rope attaches directly to LED insert within the knob
– Uses Dot XL Pro (Rechargeable LED Chip

—> LED Ultra Stubby Pro 
– 3D Printed by PBA 
– Diameter: 40mm // 27mm Tall // 9mm rope hole
– Weight: 19g

—> LED Ultra XL Pro 
– 3D Printed by PBA 
– Diameter: 42mm // 29mm Tall // 9mm rope hole

Reactor Plus – uses V2 Capsules by flowtoys
– Uses bearings 
– Uses 10-12mm rope
– Elastomer exterior for optimal grip
– Rope attaches directly to bearing using a FoF crimp. If you are DIY’ing, you can use an epoxy plug. Poi Mechanic at Lost in Flow has a youtube instructional video on how to create this. 

-Weight – 76.8g
-Length – 4.70” (119.5mm)
-Button side Width – 1.39” (35.3mm)
-Center width – 1.2” (30.7mm)
-Rope side width – 1.19” (30.3mm)

Reactor Basic – uses V2 Capsules by flowtoys
– Does not use bearings 
– We can fit up 1/2” or 12mm diameter rope. 
– Elastomer exterior for optimal grip
– Rope connects directly to the capsule. We use crimps that nestle close to the battery. Poi Mechanic has an instructional epoxy plug video if you are DIY. 
– Depending upon rope diameter, you may need to expand rope hole on the capsule. !!Remove circuit board first!! We recommend using a Dremel tool.

-Weight – 60.4g
-Length – 4.06” (103mm)
-Button side Width – 1.36” (34.6mm)
-Center width – 1.2” (30.7mm)
-Rope side width – 1.19” (30.3mm)

Egg Knob Plus – Uses DOT XL Pro chips by UltraPoi
– Uses Bearings 
– Uses 10-12mm rope 
– Elastomer exterior for optimal grip
– Rope attaches directly to bearing using a FoF crimp. If you are DIY’ing, you can use an epoxy plug. Poi Mechanic at Lost in Flow has a youtube instructional video on how to create this. 

Weight w/ chip and bearing: 35 grams + crimp = 37.5 grams

Length: 41mm
Rope side width: 25mm
Top width: 38mm

Egg Knobs – Uses DOT XL Pro chips by UltraPoi
– Does not use bearings 
– We can fit up 1/2” or 12mm diameter rope. 
– Elastomer exterior for optimal grip
– Rope connects directly to the insert. Poi Mechanic has an instructional epoxy plug video if you are DIY. 

Weight: 28.5 grams + crimp = 31 grams
Length: 41mm 
Rope side width: 25mm
Top width: 38mm