- Sorry, this product cannot be purchased.
Isis Fire Poi – Sold individually – (Customizable)
$60.00
Description
Single Isis fire poi with technora a tether and a knob with a variety of hardware attachment options.
Uses Pure kevlar, it has a longer lifespan, holds more fuel and burns brighter.
Standard setup Includes:
– Wick
– Knob (See below for description and photos above)
– Relax, Hybrid or Static Technora Tether in various diameters
– Isis Wick Options:
– 3″ tall x 3″ wide -140g ~ 4:30+ minute burn
– 3.5″ tall x 3″ wide – 160g ~5:30+ minute burn time
– 4″ tall x 3″ wide – 180g ~ 6:00+ minute burn time
– 4.5″ tall x 3″ wide – 200g ~6:30+ minute burn time
Hardware Options near heads (See photo):
#1 Technora directly to head’s eyebolt)
#2 Technora -> Quick-link -> Head
#3 Technora inset into head (Only soak the bottom 4/5th’s of the head and allow the dry kevlar to wick fuel upwards)
Technora Options (See photos)
– Relaxed – Hybrid – Static
– Relaxed: 5/16″ – 3/8″ – 1/2″
– Hybrid: 9.5mm – 10.5mm – 11.5mm – 12.5mm
– Static: 8mm – 10mm – 11mm – 12mm
Overall length = measures entire poi tip-to-tip (including the knobs and heads). We recommend measuring from center of palm to arm pit. Most spinners choose 18″ to 28″.. If we do not receive a length, they will be set to 24”. We finish the knobs off permanently through melting or crimping, unless requested otherwise.
Standard washer count per knob: 2
– Pomgrip, Ovo, Flex Standard & Delphin washers weigh: 3 grams each
– Flex XL & Stubby Washers weigh: 4-6 grams each
Knob options (See Photos for color references):
—> TORQ Knobs
– Weight: 6.5-8 grams
– Diameter: 37.5mm / Height: 22mm
– 3D Printed in Maine
– Tex-TORQ has a gritty grippy exterior finish
—> PomGrip 2.0 by LanternSmith
– Weight: 16g 33g with max washers.
– Diameter: 35mm // Height: 25mm
– Half sphere shape. Squishy
– Grippy
—>Ovo Knob by LanternSmith
– 27g (empty), capable of 60g with full with washers
– Diameter: 35mm // Height: 48mm
– Grippy
—> Sphere knobs by Home of Poi/PlayJuggling
– Weight = 30g
– Diameter: 37mm
– Firm rubber-silicone
– HOP Have textured logo on side
—> 3D Printed Knobs
– These have our logo printed on two faces of each knob
Flex Standard:
– 7 grams
– 34mm Diameter x 23mm Tall
Flex XL:
– 10 grams
– 42mm Diameter x 28mm Tall
– Upgrade 2-tone here:
Stubby:
– 7 grams
– 39mm Diameter x 23mm Tall
—> Delphin Knob
– Weight: 5 grams
– Diameter: 34mm // Height: 23mm
– Comparable in size to Flex standard knob
– Firm foam-like material – Not slippery when wet
—> Px3 Knob
– Weight: 10g
– Diameter: 33mm // Height: 22mm
– Small grip
– Thermoplastic Rubber
—>Flip
– Weight: 13g
– Diameter: 35mm // Height: 25mm
– Comparable in shape to Flex Standard
– Rubber-like firm material
– Changes texture with introduction to hand oils and becomes Grippy
—> Blank Ultraknob (NO LED)
– Weight: 20g
– Diameter: 38 mm // Height: 28mm
LED Series:
—> LED Ultraknob Basic by UltraPoi
– Weight: 23
– Diameter: 38 mm // Height: 28mm
– Multi-mode settings
– Rechargeable with 2032 Coin Cell battery (Charger not included)
– Warrantied by UltraPoi directly
—> LED Ultra Stubby Basic by UltraPoi
– 3D printed
– Weight: 17.5 grams
– Diameter: 42mm // Height: 28mm
—> LED Ultra Flex XL Basic by UltraPoi
– 3D printed
– Weight: 16g
– Diameter: 39mm Height: 23mm
—> LED UltraKnob Pro by UltraPoi
– Weight: 26g
– Diameter: 38mm // Height: 28mm
– Rope attaches directly to LED insert within the knob
– Uses Dot XL Pro (Rechargeable LED Chip
—> LED Ultra Stubby Pro by UltraPoi
– 3D Printed and fits 1 washers
– Diameter: 40mm // 27mm Tall
– Weight: 19grams
—> LED Ultra Flex XL Pro by UltraPoi
– 3D Printed and fits 1 washer
– Diameter: 42mm // 29mm Tall
-Weight: 19 grams
Reactor Plus by Lost in Flow – uses V2 Capsules by flowtoys
– Uses bearings
– Fits 8 -12mm rope
– Elastomer exterior for optimal grip
– Rope attaches directly to bearing using a FoF crimp. If you are DIY’ing, you can use an epoxy plug. Poi Mechanic at Lost in Flow has a youtube instructional video on how to create this.
-Weight – 76.8g
-Length – 4.70” (119.5mm)
-Button side Width – 1.39” (35.3mm)
-Center width – 1.2” (30.7mm)
-Rope side width – 1.19” (30.3mm)
Reactor Basic by Lost in Flow – uses V2 Capsules by flowtoys
– Does not use bearings
– Fits up 1/2” (12mm) diameter rope.
– Elastomer exterior for optimal grip
– Rope connects directly to the capsule. We use crimps that nestle close to the battery. Poi Mechanic has an instructional epoxy plug video if you are DIY.
– Depending upon rope diameter, you may need to expand rope hole on the capsule. !!Remove circuit board first!! We recommend using a Dremel tool.
-Weight – 60.4g
-Length – 4.06” (103mm)
-Button side Width – 1.36” (34.6mm)
-Center width – 1.2” (30.7mm)
-Rope side width – 1.19” (30.3mm)
Egg Knob Plus by Lost in Flow – Uses DOT XL Pro chips by UltraPoi
– Uses Bearings
– Fits 8-12mm rope
– Elastomer exterior for optimal grip
– Rope attaches directly to bearing using a FoF crimp. If you are DIY’ing, you can use an epoxy plug. Poi Mechanic at Lost in Flow has a youtube instructional video on how to create this.
Weight w/ chip and bearing: 35 grams + crimp = 37.5 grams
Length: 41mm
Rope side width: 25mm
Top width: 38mm
Egg Knobs by Lost in Flow- Uses DOT XL Pro chips by UltraPoi
– Does not use bearings
– We can fit up 1/2” (12mm) diameter rope.
– Elastomer exterior for optimal grip
– Rope connects directly to the insert. Poi Mechanic has an instructional epoxy plug video if you are DIY.
Weight: 28.5 grams + crimp = 31 grams
Length: 41mm
Rope side width: 25mm
Top width: 38mm
Additional information
Hardware Options | Technora -> 2" of chain -> 1" Quick-link -> head (3" of hardware total), Technora -> 3" of chain -> straight to head, Technora directly to head\\\'s eyebolt, Technora -> Quick-link -> Head, Technora inset into head (Special fueling requirements) |
---|
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
Shipping Policy
Components shipped within 1-2 days of order via First class, Priority 2-3day or Express via USPS.
All props that require assembling or creation will be shipped with 3-5days, unless specified otherwise, via USPS Priority 2-3day or Express.
International orders ship with 3-5days of placing order - First class ~20 days, Priority 6-10 day or Express 3-5days. Shipping First class is based off weight.
If an international package is lost, we will do our best to assist you in locating it. If you have purchased insurance, we will initiate a claim for you. If you have not purchased insurance, Flow on Fire is not responsible for the loss.
Refund Policy
~ Contact me within: 7 days of delivery
Cancellation / Return / Exchange Policy
If in the first seven days of receiving your prop you are dissatisfied and wish to return it - the buyer will be responsible for all shipping costs. The item must be returned in new, unused condition. Upon receiving said prop and it is in its original condition - Flow on Fire will issue a refund - minus the initial shipping cost. The return ship date must be postmarked within a week of purchase date.
General Inquiries
There are no inquiries yet.
What others are saying
There are no contributions yet.